Pool maintenance is essential to ensure that your water is safe. It’s particularly important to prevent calcium carbonate levels from getting too high. Not only can excess calcium cause unsightly rust stains on surfaces and white build-up on metal fittings, but high calcium carbonate levels can also lead to bigger problems, eating away at important pool equipment, like filters and chlorine dispensers. Fortunately, there are 5 tried-and-true ways to maintain your pool and prevent calcium from building up
Keep an Eye on the pH Balance of Your Pool
When the pH level in your pool gets imbalanced, the alkalinity can cause issues like algae growth, calcium deposits, and cloudy water. To make sure that your pool water is safe and clean, it's important to make sure the pH levels are balanced properly. If you don’t have the time to check your water’s chemical balance on a regular basis, why not speak with pool maintenance professionals who can complete chemical balance checks for you?
Check Your Pool Water Temperature
Excess calcium can sometimes arise due to extreme water temperature, as well. The colder your water, the better, since calcium is more soluble in cold water and won’t have as many opportunities to build up. If your pool water gets too warm, you are more likely to end up with a pH imbalance. Keep an eye on your water temperature to make sure it isn’t getting too warm.
Aim for a Balanced Level of Calcium in Your Pool
Given that high calcium levels in pool water can cause a variety of issues, such as cloudiness and equipment failure, it might seem tempting to remove calcium from your pool altogether. However, if the calcium levels in your pool are too low, you can wind up with other problems with your plaster pool walls and metal fittings. It’s essential to have just the right level of calcium in your pool. The ideal calcium level ranges from 100-400 parts per million. If you’re not sure how much calcium should be in your pool water, it’s best to consult a professional.
Use Your Water’s Hardness Level as a Clue
If you notice particularly hard water in your pool, this could be a symptom of high calcium levels. If your water is extra hard, you will want to balance it with a water softener that will combat the high calcium content. Water softeners can also help remove pool stains. On the other hand, if your water isn’t hard enough, this may be a sign that you don’t have enough calcium in your water, and you may need a water hardener. Extremely hard or soft water can be a signal that you need to rebalance your pool water.
Schedule Professional Pool Care
If you’re feeling overwhelmed by all of the steps involved in keeping your pool water safe, you may want to seek professional help. Experienced specialists can recommend and implement a maintenance plan to ensure that your water is properly balanced. Although scheduling professional pool maintenance may sound costly, it can actually save you a lot of money, time, and stress in the long run by preventing major problems down the road.
Check out this article for some additional ideas!
Removing Calcium Carbonate
The best ways to remove calcium carbonate is to use a calcium releaser/cleaner, preferably an acid-free product, so it doesn't ruin the finish of the pool tile or glass.
Next, you can try using a pumice stone or scale remover. What you use depends on your pool's surface.
If you have tile or concrete, a pumice stone is perfect for removing scaling. It's important that you keep both the pumice stone and the surface wet to prevent scratching.
You can also use a commercial stain eraser to remove calcium carbonate. Stain erasers make removing calcium carbonate deposits easy. They're designed for specific areas and have an attachment to make it easier to reach areas.
If your pool surface is fiberglass, then you'll want to use a scaling treatment. Most scaling treatments are safe for any pool surface. The treatment is added to the pool water. Over several weeks the deposits are slowly dissolved until completely gone. There's no scrubbing involved.
Removing Calcium Silicate
Calcium silicate deposits are removed with a pumice stone and a whole lot of scrubbing. However, you can only use a pumice stone on tile or concrete. If you have a fiberglass pool, a pumice stone will scratch.
Your other option is to then use a professional calcium remover. It will dissolve the deposits.
You should first test the product to make sure that it doesn't scratch or discolor the surface. With stubborn scales, you may have to reapply the remover several times until the surface is free of all scales.
Here https://www.layorcare.com/what-to-do-if-your-pool-has-calcium-buildup
Comments
Post a Comment